HY-WDSS2E Claw Ultrasonic Anemometer, 2D Wind Speed & Direction Sensor for Outdoor Meteorological Monitoring
Introduction
Stainless steel make it robust and anti-corrosive and withstand all climatically conditions.Claw structure ensure its accuracy as much as possible by reducing wind resistance.
It is widely used in the meteorological industry as well as various outdoor applications.
Application
⦁ Weather observation
⦁ Ports and harbour
⦁ Emergency services
⦁ Coastal and ocean buoys
⦁ Agriculture and horticulture
⦁ Environmental monitoring
⦁ Crane safety alarm
⦁ Photovoltaic plant
Product Details
Technical Specifications
| Wind Speed | |
|---|---|
| Wind Speed | 0 ~ 60 m/s |
| Wind Speed (Optional) | 80m/s is optional with extra cost |
| Resolution | 0.01 m/s (Accuracy: ±2%) |
| Wind Direction | |
| Wind Direction | 0 to 360° |
| Resolution | 1° (Accuracy: ±3°) |
| Output | |
| Interface | RS232 or RS485 or 4-20mA |
| Protocol | ASCII active output, NMEA0183, MODBUS-RTU, SDI-12 |
| Baud rate | 1200, 4800, 9600, 19200, 38400 |
| Wind Units | m/s, knots, mph, kph, ft/min |
| Power Requirement | |
| Sensor | 20 mA @ 7-30 VDC typical |
| Heater | Automatic ON/OFF at 0°C (400mA@24V) |
| Environmental | |
| Operating Temperature | -50 ~ +70°C |
| Protection Class | IP65 |
| Material | Stainless steel |
| Dimensions | Φ228×285mm |
| Weight | 1.1 kg |
| Shipping Weight | 5 kg |
Optional component
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Ready to work with us ？
Hongyuv Technology specializes in the R&D and manufacture of meteorological and traffic monitoring sensors, with a complete in-house independent development and production system established.
Products
Ultrasonic Anemometer
All-in-one Weather Station
Rain Gauge
Portable Weather Station
Visibility Sensor
Road Surface State Detector
Tunnel Environment Detector