HY-SA3E wind speed and direction sensor uses flight time difference of ultrasonic wave in the air to measure wind speed and direction simultaneously. HY-SA3E adopts low power consumption chip and is suitable for solar or battery power supply environment.
Introduction
It’s made in molded thermoplastic, also known as ASA,which has high outdoor weather ability. ASA is extremely resistant against UV radiation of sun,it is frost and heat resistant, standing all climatically conditions for over 10 years.
It is widely used in the meteorological industry as well as various outdoor applications.
Application
⦁ Weather observation
⦁ Ports and harbours
⦁ Emergency services
⦁ Coastal and ocean buoys
⦁ Agriculture and horticulture
⦁ Environmental monitoring
⦁ Crane safety alarm
⦁ Wind plant monitoring
Product Details
Technical Specifications
| Wind Speed | |
|---|---|
| Wind Speed | 0 ~ 70 m/s |
| Resolution | 0.1 m/s (Accuracy: ±3%) |
| Wind Direction | |
| Wind Direction | 0 ~ 360° |
| Resolution | 1° (Accuracy: ±3°) |
| Calculation | 2 minutes, 10 minutes secondary calculated Minimum, Maximum, Averaged wind, gust is optional with extra cost |
| Output | |
| Serial Output | RS232 or RS485 |
| Analog Output | 4-20mA or 0-5V (with extra cost) |
| Formats | ASCII, ASCII polled, NMEA0183, MODBUS-RTU, SDI-12 |
| Baud | 1200, 4800, 9600, 19200, 38400 |
| Wind Units | m/s |
| General | |
| Power consumption | 5-30 VDC < 15 mA typical |
| Operating Temperature | -40 ~ +70°C |
| Operating Humidity | 0 ~ 100% |
| Protection Class | IP65 |
| Dimensions | Φ104×136 mm |
| Material | ASA |
| Weight | 0.5 kg |
| Shipping Weight | 2 kg |
Optional component
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Ready to work with us ?
Products
Ultrasonic Anemometer
All-in-one Weather Station
Rain Gauge
Portable Weather Station
Visibility Sensor
Road Surface State Detector
Tunnel Environment Detector