Selection of meteo sensors for a professional monitoring task cannot be limited to choosing the most precise measuring tool. It depends on what exactly you want to measure, what conditions prevail on your site, frequency of measurements and possibility to connect your sensor with data logger or monitoring system. An efficient lab-tested instrument could be impractical when it comes to installation because of inappropriateness of its measurement range, housing, power supply or output format. The following guide covers major types of meteo sensors and specification comparison points that you should consider when selecting them for your project. It is a checklist to help you choose – but not to take the place of specification verification with the supplier.
Firstly, one must decide the purpose of the monitoring activity. The meteorological sensors monitor a variety of measurements, and not all of them are necessary for every project. Some projects might simply need monitoring of temperature, humidity, pressure, and wind conditions. A road weather network will require visibility and road surface data; an agricultural network might focus more on precipitation and radiation. World Meteorological Organization provides a guide to instruments and methods of observations which describes methods for measurement of various parameters like temperature, pressure, humidity, wind, precipitation, radiation, and visibility.
Typical sensor categories include:
▪ Temperature and humidity sensors for ambient conditions and local environmental records.
▪ Barometric pressure sensors for tracking atmospheric pressure.
▪ Wind speed and wind direction sensors for wind conditions at a fixed site.
▪ Rain gauges or precipitation sensors for rainfall amount or intensity.
▪ Visibility sensors for fog, haze, rain, snow, and other conditions that can reduce visibility.
▪ Solar radiation sensors when the project requires information about incoming solar energy.
Review the available range as a starting point, then match each sensor type to a defined project requirement rather than selecting products by name alone.
The right sensor depends on the variable being measured and the requirements of the monitoring project. Use the following guide to identify the sensor category to evaluate first.
| Monitoring Requirement | Sensor Category to Consider | Key Selection Factors |
|---|---|---|
| Wind speed and direction monitoring | Ultrasonic anemometer | Measurement range, accuracy, response time, mounting position, and power consumption |
| Multi-parameter weather monitoring at one site | All-in-one weather station | Required measurement variables, sensor configuration, output protocol, and installation space |
| Rainfall monitoring | Rain gauge | Measurement range, resolution, response characteristics, precipitation type, and maintenance requirements |
| Visibility monitoring for roads or outdoor sites | Visibility sensor | Measurement range, visibility measurement method, environmental conditions, and output interface |
| Agricultural weather monitoring | Agricultural Weather station | Required weather variables, site coverage, power availability, and data collection needs |
| Road-weather and pavement-condition monitoring | Road state sensor | Required road-condition measurements, installation method, environmental exposure, and system compatibility |
This table is a starting point for product selection, not a substitute for checking individual model specifications. Confirm the actual measurement capabilities, interfaces, and operating limits before choosing a sensor.
With individual sensors, the designer has a greater level of freedom regarding the choice of the type of measuring, its range, and position of the individual elements in the process. This kind of sensors may be helpful when there is no need to have many measurements or when the sensors should be installed in various locations. The downside is that the number of devices, mountings, connections, and compatibilities will be larger for the team to deal with.
The advantage of having an integrated station is easier installation when many variables should be measured at one location. However, not all stations include the same variables, have the same performance characteristics, or provide the same communication capabilities.
Accuracy is defined as how close a measurement will be to the true value under certain conditions. The range is described by the values that the sensor is capable of measuring. Accuracy and measurement range are different aspects, in which the range can be very broad, but it might not satisfy the required accuracy for an application.
When evaluating meteorological sensors, consider the following technical specification values in conjunction, instead of basing decisions on just one key value:
? Measurement range: Is it adequate for both minimum and maximum values at your measurement point?
? Accuracy: Is it acceptable for your measuring task, and under which conditions was it calculated?
? Resolution: Is the sensor capable of detecting the smallest changes for your needs?
? Response time: How fast can the sensor react to changing conditions?
? Sampling and reporting interval: Does the overall monitoring system deliver data at the necessary frequency?
? Calibration documentation: Which information about calibration is available for the chosen sensor model?
The above-listed values are useful for different reasons. Consider them in regard to the requirements of your project and the complete technical specification of the manufacturer.
Resolution is the minimum difference that can be detected by the detector or output device. The response time is the speed of the reading after the occurrence of a change in the value of the parameter being monitored. The sample rate is how often the measurements are taken by the system. These parameters have an effect on different aspects of the monitoring system. For instance, a variable that changes quickly may need a faster response and higher sampling rate than another one.
Inquire about the calibration of the sensor, documents provided, and if recalibration or field check is required. Information regarding the calibration process assists in understanding the relationship between the value measured by the sensor and the reference point. Calibration doesn’t imply that the sensor will be accurate forever, as factors such as installation and environmental changes can influence its operation.
WMO's Manual is an excellent authority on procedures in meteorological measurements and instrumentation. Follow the advice that pertains to your situation, and make sure that verification information is available from the manufacturer when measurement quality matters
An outdoor sensor has to operate within the real environment that exists on-site rather than the typical conditions that could be expected. The temperature extremes, precipitation, dust, salt spray, vibration, solar radiation, and icing/snowing conditions need to be considered. Look at the environmental operating conditions and protection levels as stated by the manufacturer. The IP code will help identify protection from solid or liquid ingress, but does not take the place of reviewing the complete environmental conditions.
Also take into account the availability and accessibility of power for inspection purposes. A distant place that uses solar or battery-powered sources will have different restrictions than a location that uses mains electricity. It is helpful to use low power consumption, but this must be analyzed in conjunction with the total energy requirement of the entire system.
⚠What Should You Check Before Installing Outdoor Meteo Sensors?
Before selecting a sensor for outdoor deployment, review the actual site conditions and installation constraints.
✔ Temperature and Weather Conditions: Check the range of temperatures for which the equipment can be operated and also check the restrictions on rain, dew, ice, and snow.
✔ Dust and Corrosion: Check the material for the enclosures and their protection against dust and moisture.
✔ Mounting location: Identify nearby buildings, trees, walls, or equipment that could affect the measurements.
✔ Availability of power: Determine the availability of power through any of the means of mains, batteries, solar energy, and so on.
✔ Access for maintenance purposes: Ensure that the sensor can be maintained once installed.
Do not assume that a sensor is suitable for every outdoor environment simply because it is described as weatherproof. Check the exact model specifications and installation instructions before deployment.
The location of a sensor can have an impact on the readings taken. There could be objects around the sensor which would change the conditions under which the sensor was supposed to read. In the case of wind sensors, the correct location where the sensor needs to be installed according to the project requirements needs to be established; temperature readings could be affected by direct sunlight or machinery.
Before designing is completed, make sure of the mounting, cable routing, connector protection, and any other installation requirements at the site. This will eliminate unnecessary changes while installing.
The interface between the sensor and the receiving system needs to be electrical and compatible with each other. RS485 is one such interface that is usually utilized for communication via wired channels; however, RS485 does not define any message format or ensure that data can be exchanged between two communicating systems. SDI-12 is another protocol utilized in many environmental monitoring systems and data loggers.
It is wrong to assume compatibility just because both products feature RS485. It is necessary to check the protocol type, address configuration, baud rate, connections/wiring specifications, data field configuration, units and configuration if required. If using SDI-12 or other protocol, it is important to know the version of the protocol supported by the logger and if the sensor is compatible with it.
Ask the supplier for the voltage needed, power consumption, start-up characteristics, cable limitations, types of connectors, and the output form in that particular model. If the information is going to be sent to the cloud, ensure that you have covered the entire path from the sensor to the logging device to the gateway/network and finally to the software.
Before placing an order, ask the supplier to confirm the following details for the exact sensor model:
1Communication protocol used for support.
2Supply voltage and current requirements.
3Limitations on wiring and length of cabling.
4Format and unit of output data and data fields that can be acquired.
5Compatibility with the intended data logger, controller, or monitoring software.
Should your project need RS485 and SDI-12 capabilities, verify that the interface and protocol capabilities of the particular model being considered are the same as what all other sensors within the category are capable of. Where possible, you can perform a compatibility test using the intended system receiver prior to deploying any of the sensors.
Develop a brief list of compatibility considerations and present this to the sensor manufacturer and system integrator. You should try to perform a test of one sensor with your logger and software where possible.
Meteo sensors measure atmospheric or weather-related variables such as temperature, humidity, pressure, wind, rainfall, solar radiation, and visibility. They are used in weather stations and in applications such as agriculture, road-weather monitoring, and environmental observation.
Common types include temperature and humidity sensors, barometric pressure sensors, wind speed and direction sensors, rain gauges, visibility sensors, and solar radiation sensors. The right combination depends on the monitoring objective.
Start with the conditions and decisions the data must support. Confirm that the sensor covers the expected minimum and maximum values, then check the stated accuracy across the relevant range and under the expected operating conditions.
An ultrasonic anemometer estimates wind using ultrasonic signals and typically has no cup or vane mechanism with moving parts. Traditional mechanical designs use moving components. The better choice depends on measurement requirements, environmental exposure, maintenance expectations, and the verified specifications of the models being compared.
Choosing the best meteo sensors will involve determining the parameters that you would like to measure, the kind of environment in which the sensors will be operating, as well as the reasons why you are measuring these parameters. Prior to ordering your sensors, it is important for you to check the measurement range and accuracy, the environmental compatibility, the power consumption, communication system, and compatibility with your current monitoring system.
The HongYuv is the manufacturer of meteorological sensing equipment including ultrasonic anemometer, weather station, rain gauge and visibility sensor for different monitoring applications. You are invited to review our line of Meteo Sensors and supply your requirements for measurement, environment, power supply, and data logger to the supplier.
Ready to work with us ?
Products
Ultrasonic Anemometer
All-in-one Weather Station
Rain Gauge
Portable Weather Station
Visibility Sensor
Road Surface State Detector
Tunnel Environment Detector